Accessories
Showing 25–36 of 95 results
-
A-A3044 2 Channel Microphone Mixer Pre-Amplifier
$120.90+GSTAdd to cartLearn MoreThis compact microphone preamplifier mixer has two operating modes. Mixed and discreet. In discreet mode each microphone input is assigned to its own output. In mix mode the 2 microphones are mixed and the signal comes out of both outputs. Ideal where space is limited and 240V power may not be available. Operates on 12V […]
-
A-A3207 – RCA Stereo Audio Cat5e/6 Extenders
$61.33+GSTAdd to cartLearn MoreSupplied as a pair, these handy bi-directional audio extenders allow you to send stereo audio signals over long distances using economical UTP cable (Cat5/5e/6). Ideal for connecting an audio source to an amplifier in another room. Maximum distance 75m. No power required.
-
A-A4450 – 4×4 Audio Source Matrix Mixer Switch
$1550.00+GSTAdd to cartLearn MoreThe A4450 master unit can be configured to operate as either a 4×4 Matrix, allowing any combination of inputs to be selected to an output, or as a Switcher, enabling only one input to be selected to an output at any time. This is set by the installer via a DIP switch on the rear […]
-
A-A4460 – 4×8 Stereo Audio Switcher System
$1650.00+GSTAdd to cartLearn MoreDesigned to distribute 4 stereo audio input sources to 8 stereo output zones, this system is ideal for use in function centres, hotels, meeting rooms and domestic homes etc. It sends audio sources from one room to another with total ease. Fitted with four stereo RCA connections for inputs and eight stereo RCA connections for […]
-
A-A4461 – 7″ Master Touch Wallplate For Source Controllers – Black
$962.50+GSTAdd to cartLearn MoreThis 7″ touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). This plate is a master level controller allowing selection of inputs and volume for all zones in the system. The settings menu allows for selection of button colour […]
-
A-A4840 – 2 Zone Bluetooth Audio Extension Bluetooth Wall plate
$178.28+GSTAdd to cartLearn MoreThis 2 Zone Bluetooth Audio Extension Bluetooth Wall Plate allows you to stream audio wirelessly from your devices in one room whilst your audio equipment/amplifier is located in another. Each plate connects to standard UTP cabling to relay audio signals back to the amplifier through the wall plate receiver without loss of quality. It also […]
-
A-A4903A – Redback 100V Line to Low Level Adaptor
$176.50+GSTAdd to cartLearn MoreThis useful adaptor receives a 100 volts signal from one amplifier and reduces the level down to either balanced mic level or line level to feed into the input of a second amplifier. Especially useful for expanding existing systems where additional amplifiers are being installed away from the signal source. This revised version adds an […]
-
A-A4904 – Redback 1 In to 2 Out Audio Splitter
$251.83+GSTAdd to cartLearn MoreThis compact signal splitter is provided with two input sockets. The 3 pin XLR can be configured for either 3mV or 1V sensitivity, whilst the RCA auxiliary input can be set for either 100mV or 1V sensitivity. The input signal is split into two outputs. Each output is provided with two sockets. A 3 pin […]
-
A-A4905 – Redback Mic/Line Pre-Amplifier to Line Level Out Converter
$237.50+GSTAdd to cartLearn MoreThis line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3 volts of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR […]
-
A-A4906 – Mic/Line/100V Input To Line +24V Switched Output
$255.23+GSTAdd to cartLearn MoreThe A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal. The output signal is a line level signal suitable for feeding into an amplifier. Phantom power is available to the microphone input, and a VOX circuit, with adjustable sensitivity is used to trigger output […]
